B&K Probes, Pulsers & Accessories
Logic Probe
|
Model DP-21 * Memory mode freezes pulse display * Tests TTL, DTL, RTL, HTL, CMOS & MOS* Displays pulse presence & logic states * Pulses to 30ns - pulse trains to 20MHz Part No. 3T8-521 $34.00 |
SPECIFICATIONS |
Pulser Probe
|
Model DP-31 * Sync input point * For TTL, DTL, RTL, HTL, CMOS and MOS* External square wave terminal * Produces 10uS pulse signal at 100mA Part No. 3T8-531 $35.00 |
SPECIFICATIONS Pulse Repetition Rate: 0.5 pps/400 pps. Pulse Width at 100mA load: 10uS. Output Current: Pulser mode - 100mA sink/source; square wave mode - 5mA sink/source. Operating Supply Voltage Range: 5-15V. Supply Voltage (Max.): +-20V. Output Connection Voltage (Max.): +-35V. Sync Input Voltage (Max.): +-120V 15 sec. Power Supply Prot.: +-25V 15 sec. Output Prot.: +-35V 15 sec. Dimensions: 8.07 x .71 x .64 (205 x 18 x 16.5mm). Weight: 3 oz. (55g). |
50 MHz Digital Probe
|
Model DP-51 * 2 Megohm input impedance * Memory mode to "freeze" pulse display* Displays pulse presence & logic states * TTL, DTL, RTL, HTL, CMOS, MOS, HiNIL Part No. 3T8-551 $95.00 |
SPECIFICATIONS Min. Detect. Input Pulse Width: 10ns. Pulse Standard Mode: Will detect and stretch input pulse transition. Memory Mode: Will detect and latch input pulse transition. Logic Thresholds: TTL/DTL: Logic One: 2.4V; Logic Zero: 0.8V. CMOS: Logic One: 70% of supply voltage; Logic Zero: 30% of supply voltage. Input Overload Prot.: +-50VDC. Power: 5 to 15 VDC. Dimensions: 6.5 x 1.25 x .75" (16.25 x 3.12 x 1.9cm). Weight: 3.5 oz. (98g). |
High Voltage Probe/Meter
Model HV-44
* Positive polarity only
* Not for microwave ovens
* Full scale +- 3% accuracy
* Factory calibrated at 25 kV
* Two tips included (round/flat)
* Uses optional carrying case LC-32
* Measures voltages up to 40,000 KDC
Part No. 3T8-500
$109.00
High Voltage Multiplier Probe
Model PR-28
* Impedance: 600 M ohms
* Uses optional carrying case LC-32
* 14 Inches long times 2.25 diameter
* Dual banana connector on 30 inch cord
* Factory internally calibrated at 25 kV
* Accuracy: +- 3% plus instrument accuracy
* Voltage Range: 40 kVDC and 20 kVDC (60Hz)
* Frequency Range: DC-80Hz (20 kVDC max 60Hz)
Part No. 3T8-528
$59.00
Deluxe 10:1/Direct and 10:1 and 100:1 Probes
SPECIFICATIONS
Bandwidth: Model PR-37: 100MHz (10MHz); Model PR-46: 250MHz. Division
Ratio *: Model PR-37: X10 (X1); Model PR-46: X10. Input R: Model PR-37: 10M (1M); Model PR-46: 10M; Input C: Model PR-37: 11.5pF (40pF); Model PR-46: 16pF. Compensation: Both models: 10-60pF. DC Volts (max): Model PR-37: 600V p-p 300 VDC + AC peak; Model PR-46: 600VDC + AC peak. Length: Model PR-37:52"; Model PR-46: 50". Both models have BNC type connectors. Note: (*)
denotes that Model PR-37 includes a reference position that grounds the tip through a 9M ohm resistor. Also note that Model PR-46 is recommended for use with all 100MHz oscilloscopes.
Model PR-37 Part No. 3T8-537
$54.50Model PR-46 Part No. 3T8-546
$75.50
Mini-Lock Clip Leads
Model FP-6
* 24" Color coded leads
* Mini-lock to banana plug style
* Great for all hard to reach areas
Part No. 3T8-560
$19.00
Portable DMM Carrying Case
Model LC-28
* Fits B&K Models 2800 and 2810
* Grained leatherette construction
* Storage compartment for test leads
* Inside dimensions (HxWxD): 6 x 4-1/4 x 2-3/4"
Part No. 3T9-528
$22.00Model 1422-20 MHz Portable Oscilloscope Accessories
Battery Pack
Model BP-14 Part No. 3T6-514 $74.50
CRT Adapter Chart
Model 467/470/480/490 CRT CHT
Part No. 3T9-560
$18.00
VDT/CRT Restorer/Analyzer Adapters
Note: Six commonly used adapters are supplied with Models 467, 470, 480
and 490 CRT Restorer/Analyzers. Others are optional. Refer to the latest set up chart for your restorer (Part No. 3T9-560) to find the proper adapter to use for any CRT. To determine our part number, simply add the prefix "3T9-5" to the B&K model numbers listed below. For example, Model CR-1 would be 3T9-501 and CR-45 would be 3T9-545.
Model CR-1 Adapter: Use to test RCA standard 110 degree color types
18VANP22, 19JXP22, 19VBLP22, 19VCWP22 and others. Also RCA 90 deg. Color types 15VADP22, 17VANP22, 19VDKP22, 19VEQP22 and others.
Model CR-2 Adapter: Tests 70 deg. color types 14BCP22, 17EJP22, others.
Model CR-3 Adapter: Tests RCA button base 90 deg. color, type 470BE22 types 17EZP22, 19GXP22, 23VBSP22, others, and large Triniton.
Model CR-4 Adapter: Tests special 90 deg. and GE standard in-line types
15YP22, 16VBSP22, 16VEMP23, others.
Model CR-5 Adapter: Tests small color Trinitron types 250NB22, 330AB22,
400DNB22, others.
Model CR-6 Adapter: Tests RCA button base 90 deg., standard B&W 11JP4,
16XP4, 19GEP4, 470ARB4, others.
Model CR-7 Adapter: Tests 7-in miniature special B&W types 9AEP4, 12CWP4, 230AB4, others.
Model CR-8 Adapter: Tests 7-in miniature special B&W types 9XP4, 110CB4, 140AKB4, others.
Model CR-9 Adapter: Tests RCA button base special B&W 17DEP4, 19ABP4,
21EAP4, others.
Model CR-10 Adapter: Tests Duo-Decal 70 deg. B&W types 8HP4, 14BAP4, 16RP4, others.
Model CR-11 Adapter: Tests Sylvania shell 70 deg. B&W 12BEP4, 16BCP4,
17BYP4, 23JP4, others.
Model CR-12 Adapter: Tests GE in-line special color types 11SP22, 11WP22, others.
Model CR-13 Adapter: Tests Quintrex Color types 510FLB22, 370BRB22,
420AMB22, others.
Model CR-14 Adapter: Tests Japanese miniature base color types 250XB22,
420UB22, others.
Model CR-15 Adapter: Tests Japanese in-line colort CRT types 9VACP22,
370AUB22, 270BV22, others.
Model CR-16 Adapter: Tests Sylvania and GE 90 deg. in-line 13VAHP22,
17VAQP22, 19VEBP22, others.
Model CR-17 Adapter: Tests new Sony Triniton types 520520HB22, 570AB22,
others.
Model CR-18 Adapter: Tests Zenith special in-line types 13VAMP22, 17VDBP22.
Model CR-19 Adapter: Tests 470ADB22, 510EUB22, 560HB22, 670CB22 and similar types.
Model CR-20 Adapter: Tests 19VGZP22, 19VHSP22, 25VETP22, 25VEUP22,
25VEWP22.
Model CR-21 Adapter: Tests European 110 deg. in-line CRTs A56-500X,
A66-500Y.
Model CR-22 Adapter: Tests GTE Sylvania 100 deg. color tri-potential.
19VHTP22, 25VEMP22.
Model CR-23 Adapter: Tests RCA 90 deg. Bi-potential in-line 19VHYP22,
19VJKP22.
Model CR-24 Adapter: Tests RCA 90/100 deg., German 19VKFP22 and A67-700X.
Model CR-25 Adapter: Tests 90 deg. low Bi-potential in-line 13VBEP22,
19VHWP22, 420AGB22, others.
Model CR-26 Adapter: Tests color in-line types 180RB22, 180YB22, Sears
projection.
Model CR-27 Adapter: Tests color inline/delta types 370ELB22, 470HMB22,
670DB22, others.
Model CR-28 Adapter: Tests color in-line types 370ESB22, 420CUB22,
510SJB22, others.
Model CR-29 Adapter: Tests Zenith projection types 6ABP1, 6ABP55, 6ABP56.
Model CR-30 Adapter: Tests color in-line types 470LWB22, 510TXB22, 560MB22,others.
Model CR-31 Adapter: Tests color in-line types 320CSB22, 370KSB22,
370LGB22, others.
Model CR-32 Adapter: Tests color in-line types 140BYB22, 150BMB22, 160DB22,others.
Model CR-33 Adapter: Tests color in-line types 150AZB22, 370HAB22,
250AMB22, others.
Model CR-34 Adapter: Tests projection screen unit potential, C5M120P22-R,-G, -B; EP96X24, EP96X25, EP96X26, others.
Model CR-35 Adapter: Tests color projection and high resolution types
6ST6191, CE781M6P22, EP96X16 X17 X18, C5M10P22, others.
Model CR-36 Adapter: Tests in-line 90 deg. color types 520RB22, A34JBUOOX,A44JFZOOX, others.
Model CR-37 Adapter: Tests color CRTs (SONY) 710AB22, A67JHG00X, A67JHG01X.
Model CR-38 Adapter: Tests color CRTs and projection tubes (SONY) 680CB22,A64JKB00X, SD116-B, others.
Model CR-39 Adapter: Tests color projection tubes 180ADB22-B, 180WB22B,
EWX8, others.
Model CR-40 Adapter: Tests color CRTs (SONY) 330ADB22, 330WDB22.
Model CR-41 Adapter: Tests color CRTs, color monitor CRTs 220BD22,
320CGB22, 370HYB22, 510ABEB22, M19JJX01X, others.
Model CR-42 Adapter: Tests color in-line types A14JJD30X, A26JAS01X,
290KB22, others.
Model CR-43 Adapter: For use with VT0 725 B22 and VT0729 B22.
Model CR-44 Adapter: For use with 670 CRB22.
Model CR-45 Adapter: For use with A63JBG50X, A63JBG0X, A63JXQ83, A63JXQ85.
Last Updated
April 24, 2000